1 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com speci cations are subject to change ceramic disc capacitors ncd series class ii/iii general purpose, hi-k (dielectric constant class ii/iii) type features ? wide selection of temperature characteristics ? high insulation resistance ? excellent high frequency characteristics ? economically priced ? available with formed leads and on tape for automatic .. insertion specifications * special low dissipation factor (1.0% max.) y5f and y5p dielectrics are also available. contact nic for availability. temperature characteristics y5f y5p z5u z5v operating temperature range -30c ~ +85c -30c ~ +85c +10c ~ +85c +10c ~ +85c capacitance range 100pf ~ 0.01 f 100pf ~ 0.022 f 0.001 f ~ 0.01 f 0.001 f ~ 0.1 f standard tolerance 10% (k) 10% (k) 20% (m) +80%/-20% (z) capacitance change over temperature range 7.5% 10% -55% ~ +22 -82% ~ +22% dissipation factor 2.5%* 2.5%* 5% 5% insulation resistance minimum 10,000 megohms working voltage range 50vdc ~ 1kvdc dielectric withstanding voltage (test voltage) 2.5 times rated voltage for not less than 1 second, 50ma maximum load life test @ 85c 1,000 hours cap. change 10% 10% 20% 30% d.f. (max.) 4% 4% 7.5% 7.5% i.r. (min.) 1,000 megohms test conditions 1khz, 1.0v 02vrms 1khz, 0.5v 0.1vrms *see part number system for details
2 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com speci cations are subject to change ceramic disc capacitors standard products and maximum diameter (mm) by t.c. and voltage ncd series class ii/iii lead diameter 0.6mm is standard body thickness 2 ~ 4mm dependent on cv *.0047 f and above not available in y5f, please use y5p. nic reserves the right to request minimum quantities on certain values. (bulk only) (bulk and taped styles) 23 min. 5 max. s j style 1.5+0.2 4.7 + 1 5 max. s d style 1.5+0.2 k style 23 min. 5 max. 1.5+0.2 s e style 4.7 + 1 5 max. 1.5+0.2 s 23 min. 2 max. s low voltage 100vdc & below standard 500vdc & up 23 min. 3 max. s cap. (pf/ f) y5f/y5p* z5u z5v working voltage (vdc) 50 100 500 1k 50 100 500 1k 50 100 500 1k 100~470pf 6 6 6 ------ 560 666------ 680 667------ 750 667------ 820 667------ 0.001 f677666 - 66 0.0015 6 8 8 6 6 7 - 6 6 0.0022 6 9 10 6 7 7 6 6 6 0.0027 7 10 12 6 7 8 6 6 7 0.0033 7 10 14 6 7 9 6 7 8 0.0047 8 12 14 6 8 10 6 8 8 0.0056 9 14 16 6 9 10 6 8 9 0.0068 9 14 16 7 9 12 6 8 10 0.0082 10 16 18 7 10 12 6 9 10 0.01 12 16 20 7 10 12 6 9 10 0.015 14 21 - 9 14 16 7 10 12 0.022 - - - 10 16 18 8 14 16 0.033 - - - 8 18 22 7 16 18 0.047 - - - 8 21 24 7 16 21 0.068 - - - 8/9 24 - 8 16 - 0.1 - - - 8/9 26 - 8/9 17 - lead spacing (mm) - s body diameter standard bulk standard t&r optional bulk mm (inches) optional t&r mm (inches) 5 ~ 11 6.35 0.8 5.0 0.8 5.0 0.8 (0.200ls) 2.5 0.8 (0.100ls) >12 6.35 0.8 5.0 0.8 7.5 0.8 (0.295ls) 7.5 0.8 (0.295ls) 10.0 0.8 (0.395ls) 10.0 0.8 (0.395ls) ncd 103 m 50 z5u tr j optional packaging tr = taped and reel tb = tape and box (ammo) optional lead style c = cut lead d = inside kink (short leads) e = outward kink (short leads) j = inside kink (long leads) k = outward kink (long leads) temperature coef cient working voltage dc tolerance code c = 0.25pf k = 10% d = 0.5pf m = 20% j = 5% z = + 80% / - 20% capacitance code, expressed in pfd, first two digits are signi cant, third digit is no. of zeros. ?r? indicates decimal for under 10pfd. series rohs compliant f .100ls optional lead space (ls) and/or lead length (ll) in inches
3 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com speci cations are subject to change ceramic disc capacitors taping speci cations dimensions (mm) symbol d max. d p p 0 p 1 p 2 sh h 0 h 1 d wl t h value < 12 0.6 12.7 12.7 5.1 6.35 2.5 20.0 applies to parts with crimped leads 16.0 32.25 max. 4.0 18.0 11.0 max. 0.6 0.0 3.85 5.0 3.18 6.35 >12 ~ 23 0.6 or 0.8* 25.4 8.95 12.7 7.5 h max. + d max. 7.7 9.5 tolerance < 12 +0.06 -0.05 1.0 0.2 0.7 1.0 +0.8 -0.2 +1.5 -1.0 0.5 --- 0.2 0.5 --- 0.3 2.0 >12 ~ 23 1.5 1.3 *lead diameter dependent on capacitor diameter. contact nic for details straight leads <12mm diameter (a slight lead are may be present) d d h h 1 l w p 0 p p 2 p 1 s d crimped leads <12mm diameter inward (j) & outward (k) are available d d h 0 h 1 l w p 0 p p 2 p 1 s d h crimped leads >12 ~ 23mm diameter inward (j) & outward (k) are available d d h 0 h 1 l w p 0 p p 2 p 1 s d h straight leads >12 ~ 23mm diameter (a slight lead are may be present) d d h h 1 l w p 0 p p 2 p 1 s d h t
4 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com speci cations are subject to change ceramic disc capacitors taping speci cations ammo pack h 372 (14.64") l 377 (14.84") w 55 (2.16") acceptable to standard radial type cartridge. acceptable to standard radial type cartridge with a few extra accessories. d < 354 (13.93") b > 21 (.83") but < 30 (1.18") w < 55 (2.16") = = = = h l w reel w d b part number suffix for optional tape & reel or tape & box packaging tape & reel straight lead options trf = tape & reel with 5mm lead-space tr.100lsf = tape & reel with 2.0mm lead-space tr.250lsf = tape & reel with 6.35mm lead-space tr.300lsf = tape & reel with 7.5mm lead-space tr.375lsf = tape & reel with 9.5mm lead-space tape & reel crimped lead options (j = inward crimp, k = outward crimp) jtrf or ktrf = tape & reel with 5mm lead-space jtr.250lsf or ktr.250lsf = tape & reel with 6.35mm lead-space jtr.300lsf or ktr.300lsf = tape & reel with 7.5mm lead-space jtr.375lsf or ktr.375lsf = tape & reel with 9.5mm lead-space tape & box straight lead options tbf = tape & reel with 5mm lead-space tb.100lsf = tape & reel with 2.0mm lead-space tb.250lsf = tape & reel with 6.35mm lead-space tb.300lsf = tape & reel with 7.5mm lead-space tb.375lsf = tape & reel with 9.5mm lead-space tape & box crimped lead options (j = inward crimp, k = outward crimp) jtbf or ktbf = tape & reel with 5mm lead-space jtb.250lsf or ktbr.250lsf = tape & reel with 6.35mm lead-space jtb.300lsf or ktb.300lsf = tape & reel with 7.5mm lead-space jtb.375lsf or ktb.375lsf = tape & reel with 9.5mm lead-space notes: 1. the above lead-space options may not be available in all part diameters. contact nic for details. 2. inward "j style" and outward "k style" may not be available in all part diameters and voltages. contact nic for details.
|
